Effective noise control products for office walls

soni HEXAGON is a hexagonal acoustic element for sound absorption and optimizing the acoustic conditions in buildings. It consists of a white polyester non-woven, laminated with a decorative felt layer in modern trend colors. Designed for wall mounting, the geometric noise-absorber shapes are available in two different thicknesses – for customized interior design in line with your concept and ideas. For a significant improvement of the room's acoustics, we recommend lining 30 to 50% of the ceiling/wall surface with sound absorbers, preferably evenly distributed across the room for the best result. By minimizing sound reverberation, soni HEXAGON lowers the overall noise level and improves speech intelligibility, making your office, call center, entrance area or conference room a much more pleasant place to stay.soni HEXAGON fulfills the fire safety standards set down in DIN EN ISO 13501 and DIN 4102 (flame-retardant) for the building sector. This means you can use soni HEXAGON absorbers as an attractive and functional wall decoration wherever you need to lower the noise level with materials that meet strict fire safety regulations.For fastening soni HEXAGON absorbers on smooth and clean surfaces, we recommend our soni SPECIAL ADHESIVE. If you do not wish to use glue on a large surface area, we suggest using our soni VELCRO TAPE as an alternative fixation method. 

soni COLOR RD is our sound absorber in the dimension 620 x 620 mm for convenient insertion into already existing standard grid ceilings or Odenwald-system ceilings (OWA). It consists of a sound-absorbing white polyester non-woven layer laminated with a thin, marbled felt surface in the latest trend colors. soni COLOR RD acoustic elements considerably reduce the noise level in interior spaces and contribute to improving the acoustic conditions in offices, meeting rooms or doctor’s offices. Also schools, daycare centers and kindergartens will strongly profit from the noise reduction effect of soni COLOR RD. soni COLOR RD meets the fire safety requirements for the construction sector as set down in the DIN EN ISO 13501-1 standard. This means you can use soni COLOR RD acoustic tiles as wall and ceiling liners wherever you need to reduce the noise level with materials that meet strict fire safety regulations.For use as acoustic wall liner, soni COLOR RD tiles can be fixed on smooth and clean surfaces with our soni SPECIAL ADHESIVE. If you do not wish to use glue on the entire surface, we suggest using our soni VELCRO TAPE as an alternative fixation method. Please note: The soni VELCRO tape is only suitable for wall mounting, not for ceiling mounting.

Our soni ROOM DIVIDER is a sound absorber of a very special kind, because in addition to delivering effective sound-conditioning, it provides increased privacy for your employees and allow you to freshen up all types of rooms with the latest trend colors. The core of our soni ROOM DIVIDER is a soft non-woven panel, reinforced on both sides by a layer of compacted polyester non-woven. The visible surfaces are covered with dirt-resistant and decorative felt material of high quality. The rounded upper corners of the acoustic partition make for a modern, attractive appearance. Our soni ROOM DIVIDER score with a very good sound-absorption capacity and can be flexibly deployed wherever you need to reduce the noise level. The easy-to-assemble acoustic partitions blend harmoniously into the office architecture and create pleasant acoustic conditions for concentrated work. Practical tip: Both sides of the partition can be used as pin board. The optional high-quality accessory support feet soni FIX Base (not included in the scope of delivery) made from hard-wearing stainless steel make assembly and installation of the acoustic partition soni ROOM DIVIDER absolutely easy.

Our soni COLOR sound absorber consists of a white polyester non-woven that is laminated with a subtly structured felt material in attractive trend colors. The acoustic panels set lovely color accents and create a pleasantly quiet atmosphere. For a noticeable improvement of the room's acoustics, we recommend lining 30-50 % of the ceiling / wall surfaces with the acoustic panels, preferably evenly distributed for the best result. The material reduces sound reverberation and makes for a more comfortable ambiance. soni COLOR meets the fire safety requirements for the construction sector as set down in the European standard DIN EN ISO 13501. This means you can use soni COLOR acoustic panels as wall and ceiling liners wherever you need to reduce the noise level with materials that meet strict fire safety regulations. soni COLOR can be fixed on smooth and clean surfaces with our soni SPECIAL ADHESIVE. If you do not wish to use glue on the entire surface, we suggest using our soni VELCRO TAPE as an alternative fixation method. Please note: The soni VELCRO tape is only suitable for wall mounting, not for ceiling mounting.

Our acoustic pictures soni PICTURE are sound absorbers of a very special kind, because with soni PICTURE rooms can be designed decoratively and optimized acoustically at the same time. soni PICTURE soundproofing picture consists of a sound absorbing melamine foam, which is placed in a wooden frame of matching depth and covered with the printed fabric. This ensures that incident sound waves are effectively absorbed. soni PICTURE helps reduce background noise and minimizes echo effects, creating a quieter an hence more enjoyable environment. The print is visible on the edges for an appealing look. Our acoustic pictures soni PICTURE score with a very good sound-absorption capacity and are perfect for use wherever a noise-control solution is needed that is both decorative and highly effective in reducing the sound level. Especially in larger indoor spaces such as offices, staff cafeterias, restaurants, conference rooms, classrooms and living rooms, a sound-absorbing picture can improve speech intelligibility and thus facilitate communication. By reducing noise and improving acoustic conditions, our noise-absorbing pictures create a more pleasant working resp. living environment, which feels not only more comfortable but can also increase productivity. Thanks to this ideal combination, soni PICTURE not only helps improve the acoustic conditions in your rooms, but also adds an individual and visually highly attractive element to your interior design.

Effective and comfortable door insulation with soni PORTA Earsplittingly loud music from your teenager's room, bothersome noise from the hallway, loud phone conversations from the adjacent office, lack of discretion in treatment rooms - wherever closed doors are supposed to provide undisturbed quiet, our door insulation kit is the ideal solution for effective noise reduction.Our soni PORTA solution consists of six precisely fitting elements that form an attractive pattern and are simply glued to the door using the two included installation aids and our easy-to-understand installation instructions. Thanks to our unique, protected self-adhesive solution, you can remove soni PORTA again from smooth surfaces without leaving any residue, if necessary, for instance when moving out.Elegantly shaped cutouts for the door handle, on the left or right as needed, complete the sophisticated design.Depending on the application, the material has to be mounted either on the inside or on the outside of the door. For this reason, soni PORTA has been designed in two standard heights. It is important to install the door insulation material always on the side of the noise source.soni PORTA is suitable for the sound insulation of any room door with rebate - in private homes as well as in day-care centers, kindergartens, schools, medical facilities, offices, hotels, banks, etc.The soni PORTA elements are made of a combination of two highly effective acoustic materials: a heavy layer and an acoustic foam layer. The heavy layer on the underside of soni PORTA is glued directly to the door leaf, increasing its mass and thus the overall sound insulation effect of the door. The visible side consists of an acoustic foam layer covered with an attractive felt material. The foam’s open cells absorb sound energy. The robust and dirt-repellent felt surface is available in trendy colors. The edges of the elements can be masked with our soni VLD adhesive tape, if desired.For ordering the soundproofing set that fits your door, you will need the outer dimensions of the door leaf. Please measure the width and height of your door leaf on the outside, i.e. on the side in the direction in which your door opens.Please note: If the gap between the door leaf and the floor is too wide, we recommend mounting a door sweep or a door bottom seal. Only when all gaps and openings around the door are closed, perfect soundproofing is possible. soni PORTA is also available in a version that is not removable without residue: soni PORTA Basic Important information on installing soni PORTA door insulation: Correct installation is crucial for soni PORTA to be fully effective: 1. unhinge the door before installation and place it in a horizontal position on a stable surface. 2. apply the individual insulation elements horizontally to ensure optimum adhesion of the adhesive. Do not apply when hanging! The weight of the integrated heavy film could cause the adhesive to come loose again (does not apply to soni PORTA Basic). 3. leave the door to rest for at least 24 hours after installation and only hang it up again the next day. This will ensure that the door insulation remains in place permanently and that optimum sound reduction is achieved!

soni TRAPEZ is a trapezoidal sound-insulation element made of open-cell melamine foam (Basotect®) with exceptional sound-absorption properties. Mounted on the ceiling, soni TRAPEZ elements effectively absorb noise and reduce the reverberation level in interior spaces. soni TRAPEZ meets the fire safety standards relevant for the construction industry and has successfully passed the B1 test according to DIN 4102. Hence you can use soni TRAPEZ as a functional and decorative ceiling element wherever you need to reduce the noise level with materials that meet strict fire safety regulations. The trapeze-shaped acoustic baffels are highly resistant to aging, free of mineral fibers and physiologically safe. Especially on ceilings where crane rails, air ducts or lamps make it difficult to install sound-insulation panels across a large area, soni TRAPEZ is suitable thanks to its compact shape and can be easily adapted to any special structural conditions. For direct ceiling fixation of the absorber elements we recommend our soni SPECIAL ADHESIVE. For all cases where the elements cannot or shall not be glued to the surface, our foam spirals can be used as a practical alternative for suspension from the ceiling. Basotect® is a registered trade mark of BASF SE. 

soni COMFORT is a very hard-wearing sound absorber made of a white PES non-woven fabric with exceptionally good sound-absorption capacity. In addition, soni COMFORT offers excellent fire-resistance values. soni COMFORT has been tested successfully according to the DIN 4102 fire safety standard and is classified as fire-retardant (B1). Therefore it is the material of choice for all applications requiring both an effective noise reduction and full compliance with fire safety regulations. When used as a ceiling element, soni COMFORT also fulfills the impact-resistance requirements according to DIN 18032-3 and is ideally suited for use in sports facilities and gymnasiums. What is more, soni COMFORT is aging-resistant, free of mineral fibers and physiologically perfectly safe. All this makes soni COMFORT a true all-rounder for effective sound-conditioning measures in a wide variety of room types. For covering entire wall or ceiling surfaces we recommend using soni COMFORT F. While soni COMFORT has plain edges, soni COMFORT F has beveled edges all around (10 x 10 mm), creating a beautiful visual effect when installed edge to edge. Additional advantage: The resulting pattern helps conceal any uneven patches on the ceiling or wall. If necessary, soni COMFORT and soni COMFORT F can be cut to the desired size and shape with a carpet knife or a keyhole saw with a blade suited to cutting soft materials. For fixing the absorber panels on the wall or ceiling we recommend our soni SPECIAL ADHESIVE, our soni VELCRO tape or our soni RING HANGER.

Out soni PROTECT noise absorber is made from an open-cell melamine foam (Basotect®) with outstanding sound-absorption capacity. Use soni PROTECT to significantly improve the acoustic conditions in interior spaces. With soni PROTECT acoustic panels fixed to ceilings and walls, your room will be much less reverberant.  soni PROTECT has been tested successfully according to European as well as German fire safety standards and can therefore be used wherever you need to reduce the noise level with materials that meet strict fire safety regulations. What is more, soni PROTECT is aging-resistant, free of mineral fibers and physiologically perfectly safe. All in all, an absolute classic for optimizing acoustics conditions in buildings. For edge-to-edge installation we recommend using soni PROTECT F. It consists of the same material as soni PROTECT, but has beveled edges all around, which make for very neat joints and an attractive surface design while actually helping conceal any uneven patches in the ceiling or wall surface. Please note: We do not recommend soni PROTECT for use on wall areas that are liable to be hit or touched, as the sound insulation panels are sensitive to mechanical stress. soni PROTECT and soni PROTECT F can easily be cut to the desired size with a carpet knife. For fixing the absorber panels on the wall or ceiling we recommend our soni SPECIAL ADHESIVE. Basotect® is a registered trade mark of BASF SE. 

soni PROTECT Art is a highly efficient acoustic panel made of an open-cell melamine foam (Basotect). The sound absorber soni PROTECT Art convinces with exceptionally good absorption properties and a visually very appealing design. The relief-like surface offers an enlarged absorber area and thus improves the room acoustics enormously.With edge-to-edge installation or combined with our soni PROTECT panels, unique stylish and visually appealing wall motifs can be created. soni PROTECT Art combines a sophisticated look with effective sound reduction.soni PROTECT Art has been tested successfully according to European and German fire safety standards and can therefore be used wherever you need to reduce the noise level with materials that meet strict fire safety regulations.In addition, soni PROTECT Art is highly resistant to ageing, free of mineral fibres and physiologically perfectly safe.

Our soni CUBE seat cubes are sound absorbers of a special kind, because in addition to effective sound-conditioning of interior spaces, they score with excellent seating comfort. The core of the cubes consists of a highly effective acoustic absorber. The outer shell is made from a dirt-resistant, abrasion-proof and flame-retardant felt material available in the latest trend colors. The product’s very good sound-absorption capacity makes soni CUBE perfect for all rooms where an effective sound-insulation solution with additional practical and aesthetic value is wanted. As it ideally combines noise reduction, seating comfort and even playability, this product is a great furniture item for children's rooms, daycare centers, kindergartens or waiting rooms. But the cubes can also be used as (doubly) functional and decorative furnishing elements for exhibition booths and lounges.soni CUBE can be placed individually, grouped or stacked. If you like, you can insert a metal spiral (available from soniflex) into one of the corners and suspend your soni CUBE from the ceiling using a rope or hook – an easy and effective installation method.