soni MOUNTING PINS (20 pieces)

Easy and fast mounting of acoustic sheets

  • Fast and easy installation of noise-protection panels
  • Secure fixation
  • Strong adhesion on smooth and clean surfaces
Pin length

€13.50*

Content: 1 set
Prod. no. 80800020

Available, delivery time 2-5 days

Description

Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces. 

soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap.

The kit consists of 20 base plates with pin, plus fixation disks and protective caps.

Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thickness
Kit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

Technical data
Accessories: Accessories
Applications: Car | Motor | Boat
Outdoor area | Pool
Production hall | Workshop
Heat pump | HVAC
Machine | Compressor | Utility room
Note: - Easy handling
- Set 1 for 25 to 30 mm thick material; set 2 for 50 to 52 mm thick material
Pin length: Kit 1 (pin length: 42 mm)
Downloads
Product information request

Related products

soni SPECIAL ADHESIVE
Cartridge / Set of 6 or 12 cartridges: cartridge of 310 ml
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

€5.90*
soni FIXING SET
Set 1 / Set 2: Set 1 (for 25 to 30 mm material)
For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

€11.50*
soni RING HANGER
soni RING HANGER - for easy and fast mounting of acoustic materials. An excellent solution for the installation of sound absorbers such as soni ELEMENT, soni PROTECT or soni COMFORT.After removing the protective film, affix the soni ring hanger at the desired place on the acoustic element and hang the element from a screw hook (not included in the scope of delivery) or similar on the wall or ceiling.Ring hanger, self-adhesive for strong, long-term bondDimensions: 4.5 x 4.5 cm + ringMax. load per ring hanger: max. 1 kg

€1.80*
soniflex foam suspension spirals (24 pieces)
Acoustic baffles are hung from the ceiling by means of foam-suspension spirals (mind. 50 mm). They are easily inserted into the sheets and can be suspended by means of the eyelets on a wire rope or suspended from hooks.The eyelets can be bent open to serve as hooks. Dimensions: diameter 15 mm, total length 80 mm, length of the coils 69 mm A kit consists of 24 spirals.

Content: 24 piece(s) (€1.04* / 1 piece(s))

€24.90*