Technical sound insulation
In the technical context and in industrial production, noise control has long since been a focus topic. Ideally, effective noise protection measures are an integral part of the development process, for example in vehicle construction, mechanical engineering and the design of production lines. There is a rising demand for machines and devices that score with silent operation. However, effective technical noise control measures can generally also be added at a later date, in particular using sound insulation mats or noise control panels with both sound-insulation and sound-attenuation effects.
Based on our many years of experience, we can recommend the right product and the optimum solution for virtually any application. There is a whole range of measures that can be taken to significantly reduce noise in production halls, workshops, utility rooms and other premises. For optimum sound insulation, there are different options and specific recommendations for different room types.
Based on our many years of experience, we can recommend the right product and the optimum solution for virtually any application. There is a whole range of measures that can be taken to significantly reduce noise in production halls, workshops, utility rooms and other premises. For optimum sound insulation, there are different options and specific recommendations for different room types.
soni SPECIAL ADHESIVE
€5.90*
Cartridge / Set of 6 or 12 cartridges:
cartridge of 310 ml
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.
The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.
Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!
soni 1116 ALG
€22.90*
Thickness:
4 mm
soni 1116 ALG SK is a two-component material for heat protection and acoustic insulation: The heat-resistant surface layer is made from a high-quality aluminum foil and reliably reflects heat radiation. The bottom layer consists in a quilted glass fiber mat, which is responsible for the heat insulation effect as well as for the sound-insulation properties.
Our soni 1116 ALG SK is optimally suited for use in the hot zones of vehicles and machines. When mechanically fixed, the acoustically effective insulation mat withstands temperatures of up to 600°C. The aluminum surface doubles as barrier preventing the penetration of oil, water and fuel. The material meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200. Simply use a carpet knife to cut soni 1116 ALG SK to the required size and shape. The optional self-adhesive rear face facilitates the installation of the panels.
Content: 0.5 m² (€45.80* / 1 m²)
soni 471 SK
€10.90*
Thickness:
10 mm
Ordering acoustic panels from soniflex
soni 471 SK is a sound absorber made from PUR- foam. In a thermal embossing process its surface has not only been provided with an attractive diamond pattern, but also compacted and sealed, making it very robust and dirt-resistant. What is more, the air-permeable embossing improves the material’s acoustic effectiveness - especially in the frequency range of engine noise.
Uses for soni 471 SK
Our soni 471 SK acoustic foam scores with high hydrolysis resistance and is predominantly used in the automotive industry. For instance, soni 471 SK is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, vintage and classic cars or other vehicles. It meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200.
soni 471 SK is easy to cut to the desired size and shape with a carpet knife. Its low weight as well as the optional self-adhesive rear face make for easy and time-saving installation of the material.
Content: 0.5 m² (€21.80* / 1 m²)
soni 491 SK
€13.90*
Thickness:
10 mm
soni 491 SK is a PUR acoustic foam coated with a micro-perforated film. The sound-permeable film prevents the penetration of dirt and liquids and can be wiped clean.
Our soni 491 SK acoustic foam has proven its effectiveness in many years of practical use, successfully minimizing noise levels and providing thermal insulation in engine compartments and vehicle interiors. It meets the fire safety standards for the automotive industry as set down in FMVSS 302 and DIN 75200. Also for the insulation of your roller shutter box we can recommend the PUR foam without restrictions.
soni 491 SK scores with high hydrolysis resistance and hence significantly higher aging stability.The material is easy to cut to the desired size and shape with a carpet knife. Moreover, the self-adhesive rear face makes installation fast and easy.
Content: 0.5 m² (€27.80* / 1 m²)
soni ALU-01
€9.50*
Length of reel:
10 m
|
Width:
40 mm
Our soni ADHESIVE TAPES are ideal for masking edges, covering and protecting fragile surfaces as well as for concealing joints and cracks.
They score with excellent adhesion on a variety of substrates. Thanks to their wide range of applications, our soni ADHESIVE TAPES have become a bestseller in professional and private contexts. soni ALU-01 ADHESIVE TAPE is an aluminum-based adhesive tape that adheres very well to smooth, clean and grease-free surfaces. Its scrim reinforcement makes for extra tear-resistance. This adhesive tape is the perfect fit for our acoustic products soni HEAVY ALU and soni 1116 ALG.
Content: 10 m (€0.95* / 1 m)
soni COMFORT
€18.90*
Edges:
without beveled edges
|
Thickness:
30 mm
soni COMFORT is a very hard-wearing sound absorber made of a white PES non-woven fabric with exceptionally good sound-absorption capacity. In addition, soni COMFORT offers excellent fire-resistance values.
soni COMFORT has been tested successfully according to the DIN 4102 fire safety standard and is classified as fire-retardant (B1). Therefore it is the material of choice for all applications requiring both an effective noise reduction and full compliance with fire safety regulations. When used as a ceiling element, soni COMFORT also fulfills the impact-resistance requirements according to DIN 18032-3 and is ideally suited for use in sports facilities and gymnasiums.
What is more, soni COMFORT is aging-resistant, free of mineral fibers and physiologically perfectly safe. All this makes soni COMFORT a true all-rounder for effective sound-conditioning measures in a wide variety of room types.
For covering entire wall or ceiling surfaces we recommend using soni COMFORT F. While soni COMFORT has plain edges, soni COMFORT F has beveled edges all around (10 x 10 mm), creating a beautiful visual effect when installed edge to edge. Additional advantage: The resulting pattern helps conceal any uneven patches on the ceiling or wall.
If necessary, soni COMFORT and soni COMFORT F can be cut to the desired size and shape with a carpet knife or a keyhole saw with a blade suited to cutting soft materials. For fixing the absorber panels on the wall or ceiling we recommend our soni SPECIAL ADHESIVE, our soni VELCRO tape or our soni RING HANGER.
Content: 0.5 m² (€37.80* / 1 m²)
soni COMPOSITE
€32.90*
Color:
black
|
Thickness:
32 mm
Order your soundproofing panel from soniflex
soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level.
Applications for soni COMPOSITE
soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors.
Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.
Content: 0.5 m² (€65.80* / 1 m²)
soni DECOR
€15.90*
Rear face:
not self-adhesive (nk)
|
Thickness:
30 mm
Our soni DECOR acoustic foam consists of polyurethane- foam laminated with a sound-absorbing non-woven surface layer. The black polyester non-woven is extremely robust as well as oil- and fuel-repellent.
Due to the resistant non-woven surface, soni DECOR is widely used in technical applications. For instance, soni DECOR is ideally suited for use as sound-absorbing and heat-insulating interior lining in mobile homes, classic cars or other vehicles. Also in your home workshop, soni DECOR will achieve an effective noise reduction.
Using a carpet knife, you can cut soni DECOR to the required size and shape. The material’s low weight as well as the optional self-adhesive rear face make for easy and time-saving installation. For fixing the non self-adhesive version we recommend our soni SPECIAL ADHESIVE.
Content: 0.5 m² (€31.80* / 1 m²)
Noise protection in production halls
Production halls usually accommodate a large number of machines and devices that emit a lot of noise, which constitutes a high stress factor for employees. A significant reduction of the noise level can be achieved with the help of our special acoustic products, such as soniflex soundproofing panels.
By building a noise-control enclosure around machinery areas and equipping the ceilings with high-quality and efficient sound-absorbing products from our range, you can significantly reduce the reverberation time and minimize the reflection of sound waves.
Noise control for machines
Compressors, production machinery and other equipment often cause excessive noise levels that become almost unbearable for employees. You can reduce these noise emissions by insulating machinery enclosures with our noise-control products.
In outdoor areas, machinery, technical systems or pumps can be “silenced” with
soni RESIST, for instance. For loud compressors we recommend our soni SB 700 compressor jacket..
In outdoor areas, machinery, technical systems or pumps can be “silenced” with
soni RESIST, for instance. For loud compressors we recommend our soni SB 700 compressor jacket..
There is a wide choice of noise-control solutions available, but for optimum sound insulation, the recommended option is to build special soundproofing enclosures that separate it from the rest of the room and shield off the noise source directly.
Technical noise control from soniflex
Especially in the technological context there are numerous sound sources and noise emitters that make it very unpleasant for people to stay in the vicinity. High sound volumes that – due to strong reverberation – cause a distracting or even upsetting noise level can quickly lead to physical and psychological problems.
We offer you numerous options for achieving sustainable noise reduction through targeted measures and customizable solutions. The soundproofing products from our range not only deliver on their promise in terms of noise reduction, but are also easy to install.
Just give us a call or send us an e-mail. We will be happy to tell you more.
We offer you numerous options for achieving sustainable noise reduction through targeted measures and customizable solutions. The soundproofing products from our range not only deliver on their promise in terms of noise reduction, but are also easy to install.
Just give us a call or send us an e-mail. We will be happy to tell you more.