Equip your heat pump / HVAC system with our sound absorbers and benefit from:

  • less noise from appliances, systems and pumps
  • less flow noises from your ventilation system 
  • reliable sound insulation of your heat pump
  • a significant reduction of the noise level
  • the effective decoupling of appliances to prevent solid-borne noise transmission
  • an acoustically highly effective casing
soni SPECIAL ADHESIVE
Cartridge / Set of 6 or 12 cartridges: cartridge of 310 ml
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

€5.90*
soni ALU-01
Length of reel: 10 m | Width: 40 mm
Our soni ADHESIVE TAPES are ideal for masking edges, covering and protecting fragile surfaces as well as for concealing joints and cracks. They score with excellent adhesion on a variety of substrates. Thanks to their wide range of applications, our soni ADHESIVE TAPES have become a bestseller in professional and private contexts. soni ALU-01 ADHESIVE TAPE is an aluminum-based adhesive tape that adheres very well to smooth, clean and grease-free surfaces. Its scrim reinforcement makes for extra tear-resistance. This adhesive tape is the perfect fit for our acoustic products soni HEAVY ALU and soni 1116 ALG.

Content: 10 m (€0.95* / 1 m)

€9.50*
soni COMPOSITE
Color: black | Thickness: 32 mm
Order your soundproofing panel from soniflex soni COMPOSITE is a combination product made from our synthetic soni EVA heavy layer and an acoustic foam laminated with a decorative felt layer. This ideal combination ensures a twofold noise-control effect: sound absorption plus sound insulation – for especially high overall effectiveness in reducing the noise level. Applications for soni COMPOSITE soni COMPOSITE is particularly suitable for sound-transmission insulation. Mounted on the wall towards the neighbor’s apartment or behind a so-called curtail wall, for instance, our two-layer acoustic product achieves a noticeable noise reduction. For individual design options, you have the choice of various felt colors. Using a carpet knife, you can cut soni COMPOSITE to the required size and shape. The self-adhesive equipment of the rear face serves primarily as an installation aid.

Content: 0.5 m² (€65.80* / 1 m²)

€32.90*
soni EVA
Rear face: not self-adhesive (nk) | Thickness: 1.5 mm
soni EVA is a soft, elastic heavy layer on the basis of EPDM/EVA polymers with an admixture of flame-retardant minerals. Our soni EVA heavy layer is suitable specifically for technical applications, vehicles and machinery. It is designed to eliminate vibrations and drumming of sheet metal and metal parts. Applied to a metal structure, soni EVA will effectively reduce the sound level and prevent the transmission of noise and vibration. For soni EVA, the optional self-adhesive equipment of the rear face serves primarily as an installation aid. In the case of installation on a vertical surface or on a ceiling, we recommend additional mechanical fixation. 

Content: 0.5 m² (€27.80* / 1 m²)

€13.90*
soni FIXING SET
Set 1 / Set 2: Set 1 (for 25 to 30 mm material)
For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

€11.50*
soni HEAVY
Thickness: 1.8 mm
soni HEAVY is a heavy layer made from elastomer-modified bitumen. Its surface is protected by a transparent polyester film. Our soni HEAVY anti-drumming layer is widely used for technical applications as well as in vehicles and machines. It is designed to eliminate vibrations and drumming of sheet metal and metal parts. As a heavy / sound-deadening layer, soni HEAVY delivers the double effect of air-borne noise insulation and solid-borne noise attenuation. The product scores with excellent insulation properties. The optional self-adhesive rear face facilitates the installation of the panels. In the case of installation on a vertical surface or on a ceiling, additional mechanical fixation is required.

Content: 0.5 m² (€29.80* / 1 m²)

€14.90*
soni HEAVY ALU
soni HEAVY ALU is a sound-deadening layer made from elastomer-modified bitumen with an aluminum surface. The heat-reflecting effect of the aluminum layer provides soni HEAVY ALU with a good fire safety classification. Our soni HEAVY ALU anti-drumming layer is predominantly used for technical applications as well as in vehicle and machine construction. Applied to a metal structure, soni HEAVY ALU will effectively reduce the sound level and prevent the transmission of noise and vibration. As a sound-deadening layer, soni HEAVY ALU delivers the double effect of air-borne noise insulation and solid-borne noise attenuation.   The self-adhesive rear face serves primarily as an installation aid. In the case of installation on a vertical surface or on a ceiling, additional mechanical fixation is required.

Content: 0.5 m² (€43.80* / 1 m²)

€21.90*
soni MOUNTING PINS (20 pieces)
Pin length: Kit 2 (pin length: 63 mm)
Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

Variants from €13.50*
€14.50*

Description


Noise insulation for heating | ventilation | AC systems / heat pumps
  

Air/water heat pumps are often installed next to the house in the yard or garden. As a result, neighbors may feel bothered by the background noise of the heat pump. If you wish to maintain a good relationship with your neighbors, you can soundproof your heat pump, p. ex. using effective noise-control materials from soniflex. For this purpose, we recommend building a casing from impregnated wood or UV-resistant plastic at a distance of approx. 30 cm to the noise source (among other things, because of the heat generated by the pump). On the inside, the casing is then lined with our sound insulation product soni RESIST UV. Among the key advantages of this product is its double acoustic effectiveness of sound insulation and sound deadening for an excellent overall noise reduction effect. In addition, it is UV-stable and weather-resistant.

Retrofit solution for ventilation systems
A central ventilation system is a very practical amenity, but in many cases it has the disadvantage of being noisy. When operated at the highest setting, it may produce annoying flow noises, compromising the comfort at home respectively interfering with concentration at work. Now it is easy to retrofit standard ventilation systems with an effective noise-control solution from soniflex

Testimonials

Sound-proofing an outdoor heat pump

A customer from Germany bought our material for a sound-deadening wall around an outdoor heat pump. Here’s his report:

For a sound-proofing wall that I wanted to build around my outdoor heat pump I bought 50-mm thick soni RESIST UV sound insulation panels.

Delivery was very quick and the soni RESIST UV panels are easy to work with. They can be cut very precisely with a sharp carpet knife. After cutting, I used screws to fix the sound-deadening sheets to aluminum panels.

To achieve better force distribution, I used very large washers. I am very satisfied with the result of the sound protection measure. The sound emission of the heat pump has been substantially reduced even though the sound-deadening walls are only installed on three sides. Only if standing right in front of the heat pump you can still hear it, but the neighbors will hear practically nothing anymore.

I recommend soni RESIST UV sound-proofing panels without restrictions, especially for outdoor applications. A big thank-you for your very friendly and competent telephone support and the fast delivery by postal service.

Sound-deadening enclosure for a heat pump

Another client used our material in a sound insulation enclosure for an air-source heat pump. Here’s what he told us about the project:

As my son complained that the noise made by our heat pump interfered with his sleep at night, I borrowed a sound level meter. The measurement revealed that in the vicinity of the heat pump the noise level reached values of more than 50 dB!

So I started looking for sound protection solutions. The soniflex team suggested building a sound-deadening enclosure lined on the inside with black soni RESIST UV acoustic foam panels, which combine a sound-deadening with a sound-insulating effect. The inside of the side walls is covered in 50-mm thick soni RESIST UV sound protection sheets, the ceiling with the same material. I built the enclosure myself.

After the installation of the sound-deadening enclosure we measured the noise level at the same spot again: a reduction by more than 10 dB!

So building the sound-proofing enclosure for the heat pump brought excellent results! The soni RESIST UV acoustic foam tiles were very easy to cut to measure and install. My expectations have been fully met.

Sound insulation hood for sound-proofing a swimming-pool heat pump

After having a sound insulation hood with our material installed to sound-proof a swimming-pool heat pump, one client sent us this report:

Following the detailed advice of the soniflex team we had our swimming-pool heat pump equipped with a sound insulation hood to reduce the noise level. The sound-deadening effect of the hood is excellent. The sound-proofing hood was tailored exactly to the heat pump’s dimensions by BayerDesign in Gaimersheim. It is built from of PVC foam panels; the inner surfaces are covered with 25-mm thick soni RESIST sound-proofing panels.

The structural frame is made from stainless steel and can be adjusted for height differences. Except for the left-hand side with its air-inlet perforation, all inner surfaces including the rear wall are lined with soni RESIST acoustic foam panels.