Enhance your indoor pool / sports facility with our sound absorbers and benefit from:
- a pleasant atmosphere for athletes and spectators
- shorter sound reverberation times
- less noise from bouncing balls and similar
- appreciably improved acoustic conditions
- effective noise control using robust materials (impact resistance test)
- noise protection compliant with fire-safety regulations (DIN 4102, EN 13501)
soni SPECIAL ADHESIVE
€5.90*
Cartridge / Set of 6 or 12 cartridges:
cartridge of 310 ml
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.
The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.
Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!
soni COMFORT
€18.90*
Edges:
without beveled edges
|
Thickness:
30 mm
soni COMFORT is a very hard-wearing sound absorber made of a white PES non-woven fabric with exceptionally good sound-absorption capacity. In addition, soni COMFORT offers excellent fire-resistance values.
soni COMFORT has been tested successfully according to the DIN 4102 fire safety standard and is classified as fire-retardant (B1). Therefore it is the material of choice for all applications requiring both an effective noise reduction and full compliance with fire safety regulations. When used as a ceiling element, soni COMFORT also fulfills the impact-resistance requirements according to DIN 18032-3 and is ideally suited for use in sports facilities and gymnasiums.
What is more, soni COMFORT is aging-resistant, free of mineral fibers and physiologically perfectly safe. All this makes soni COMFORT a true all-rounder for effective sound-conditioning measures in a wide variety of room types.
For covering entire wall or ceiling surfaces we recommend using soni COMFORT F. While soni COMFORT has plain edges, soni COMFORT F has beveled edges all around (10 x 10 mm), creating a beautiful visual effect when installed edge to edge. Additional advantage: The resulting pattern helps conceal any uneven patches on the ceiling or wall.
If necessary, soni COMFORT and soni COMFORT F can be cut to the desired size and shape with a carpet knife or a keyhole saw with a blade suited to cutting soft materials. For fixing the absorber panels on the wall or ceiling we recommend our soni SPECIAL ADHESIVE, our soni VELCRO tape or our soni RING HANGER.
Content: 0.5 m² (€37.80* / 1 m²)
soni COMFORT SD
€20.90*
Color:
white
soni COMFORT SD are square acoustic tiles (620 x 620 mm) for convenient insertion into suspended standard grid ceilings or Odenwald-system ceilings (OWA).
soni COMFORT SD acoustic elements are made from a very effective sound-absorbing polyester non-woven. Special thermal compaction provides the face side of the white tiles with a smooth and visually attractive surface texture.
soni COMFORT SD acoustic tiles considerably reduce the reverberation in a room and contribute to improving the acoustic conditions in offices, conference rooms, waiting areas and other types of interior spaces. soni COMFORT SD is also an effective noise reduction measure for schools, day-care centers, kindergartens or large halls. The resulting improvements in ambient quality make long stays much more pleasant.
soni COMFORT SD meets the fire safety requirements for the construction industry as set down in the European standard DIN EN ISO 13501-1. This means that you can use soni COMFORT SD acoustic panels as ceiling liners wherever you need to reduce the noise level with materials that meet strict fire safety regulations.
Practical tip: If you wish to liven up your ceiling, we recommend using soni COMFORT SD in combination with our grid-ceiling tiles soni COLOR RD or soni COLOR Design in many stylish colors – for a distinctive surface design that turns your ceiling into a true eye-catcher.
Content: 0.384 m² (€54.43* / 1 m²)
soni RESIST
€17.90*
Color:
white
|
Rear face:
not self-adhesive (nk)
|
Thickness:
25 mm
Ordering acoustic panels from soniflex
Our soni RESIST noise protection panel consists of closed-cell polyethylene foam with both sound-insulating and sound-absorbing properties. Its closed-cell structure makes soni RESIST especially suitable for applications where it may come into contact with moisture or humidity. The extremely robust and impact-resistant sound-insulation material does not constitute a medium for microorganism growth and can be wet-cleaned if necessary.
soni RESIST is flame-retardant according to DIN 4102, as proven under B1 test conditions. Therefore the product is an excellent noise-control solution wherever you need to reduce the sound level with materials that meet strict fire safety regulations.
The use of soni RESIST
The optional self-adhesive rear face facilitates the installation of the panels. When mounted overhead or on uneven surfaces, (additional) mechanical fixation is required.
Content: 0.5 m² (€35.80* / 1 m²)
soni RESIST 1000 x 400 mm (special offer)
€10.90*
Color:
black
|
Rear face:
not self-adhesive (nk)
|
Thickness:
25 mm
Our soni RESIST noise protection panel consists of closed-cell polyethylene foam with both sound-insulating and sound-absorbing properties. Its closed-cell structure makes soni RESIST especially suitable for applications where it may come into contact with moisture or humidity. The extremely robust and impact-resistant sound-insulation material does not constitute a medium for microorganism growth and can be wet-cleaned if necessary.
soni RESIST is flame-retardant according to DIN 4102, as proven under B1 test conditions. Therefore the product is an excellent noise-control solution wherever you need to reduce the sound level with materials that meet strict fire safety regulations.
The optional self-adhesive rear face facilitates the installation of the panels. When mounted overhead or on uneven surfaces, (additional) mechanical fixation is required.
Content: 0.4 m² (€27.25* / 1 m²)
soni RESIST UV
From
€23.90*
Effective noise protection in outdoor areas: Order UV-stable acoustic panels from soniflex
Noise can become a problem not only indoors, but may also cause considerable discomfort in outdoor areas. Whether noise from traffic, construction sites or lively neighbors – soundproofing solutions for outdoor use are an essential tool for creating a quiet environment and improving your quality of life. Noise barrier walls and noise protection fences made of soni RESIST UV are an effective and durable solution for this purpose.
soni RESIST UV is a hard-wearing and acoustically effective closed-cell PE foam treated with special UV stabilization for outdoor applications. The soni RESIST UV soundproofing panel is available in black and has excellent weather and UV resistance. Hence this product can be exposed to sunlight without concern and is ideal for use as a noise barrier to neighboring properties.
The advantages of soni RESIST UV:
- Extremely low water absorption
- High stability and structural strength
- Stain-resistant and easy to clean
- Good weather and UV resistance
- No medium for micro-organism growth
- Tested according to DIN 4102, B2
Instructions/recommended implementation:
For effective sound absorption, the material should be applied on the side of the sound source and not be covered with dense material so that the sound waves can enter the acoustic panel and be absorbed. We recommend covering the joints between the panels with suitable material (e.g. fence slats, aluminum strips) to prevent gaps. After installation, the surface can be planted with greenery (e.g. ivy) or covered with fence fabric. Such an air- and sound-permeable camouflage will only slightly reduce the sound absorption effect. For pictures of real-life applications and customer testimonials click here.
Content: 0.5 m² (€67.80* / 1 m²)
soni RESIST UV 1000 x 400 mm (special offer)
From
€14.90*
Effective noise protection in outdoor areas: Order UV-stable acoustic panels from soniflex
Noise can become a problem not only indoors, but may also cause considerable discomfort in outdoor areas. Whether noise from traffic, construction sites or lively neighbors – soundproofing solutions for outdoor use are an essential tool for creating a quiet environment and improving your quality of life. Noise barrier walls and noise protection fences made of soni RESIST UV are an effective and durable solution for this purpose.
soni RESIST UV is a hard-wearing and acoustically effective closed-cell PE foam treated with special UV stabilization for outdoor applications. The soni RESIST UV soundproofing panel is available in black and has excellent weather and UV resistance. Hence this product can be exposed to sunlight without concern and is ideal for use as a noise barrier to neighboring properties.
The advantages of soni RESIST UV:
- Extremely low water absorption
- High stability and structural strength
- Stain-resistant and easy to clean
- Good weather and UV resistance
- No medium for micro-organism growth
- Tested according to DIN 4102, B2
Instructions/recommended implementation:
For effective sound absorption, the material should be applied on the side of the sound source and not be covered with dense material so that the sound waves can enter the acoustic panel and be absorbed. We recommend covering the joints between the panels with suitable material (e.g. fence slats, aluminum strips) to prevent gaps. After installation, the surface can be planted with greenery (e.g. ivy) or covered with fence fabric. Such an air- and sound-permeable camouflage will only slightly reduce the sound absorption effect. For pictures of real-life applications and customer testimonials click here.
Content: 0.4 m² (€57.25* / 1 m²)
Description
Noise control for indoor swimming pools | sports facilities
Very large spaces with high ceilings as well as sound-hard floors and walls tend to cause unpleasant acoustic conditions, especially in sports facilities and indoor swimming pools. Bouncing balls, shouting during matches or applause from spectators often lead to an intolerably high noise level because the sounds waves strongly reverberate and will fade away only slowly. This causes stress for players and spectators alike.
Our highly effective noise control products provide an easy remedy to this acoustic problem. We offer mechanically robust products that are designed for use in sports facilities and swimming pools. They have passed an impact resistance test and/or are suitable for wet areas, among other advantages. Mounted on the ceiling and the walls, they effectively absorb the sound waves generated in the facility and thus ensure an ideal training and competition environment. This makes activities in sports halls or swimming pools a pleasant leisure experience.
Our product range also includes visually appealing and acoustically effective sound absorbers for gyms and home gyms. Mounting on ceilings and walls will be a breeze - and your sporting ambitions will be supported by pleasant room acoustics.
