• Excellent adhesion on a wide variety of substrates
  • Solvent-free adhesive
  • Suitable for full-surface and spot application
  • watch tutorial
Cartridge / Set of 6 or 12 cartridges


Content: 1 cartridge(s)
Prod. no. 80800012

Available, delivery time 2-5 days


Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams.

The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling.

Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges.

Please note: 

soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. 

Keep out of reach of children!

Technical data
Note: sufficient for approx. 2 m²
easy handling
Applications: Living space | Staircase
Car | Motor | Boat
Clubhouse | Banquet hall
Indoor swimming pool | Sports facility
Kindergarten | School
Hospitality | Lunchroom
Waiting areas
Wall towards neighbors | Curtain wall
Production hall | Workshop
Heat pump | HVAC
Sound studio | Rehearsal room
Office | Call center
Machine | Compressor | Utility room
Temperature resistance: -20°C to +80°C
Accessories: Accessories
Cartridge / Set of 6 or 12 cartridges: cartridge of 310 ml
Color: white
Product information request

Related products

soni fixing set
For the mechanical fixation of soundproofing material. Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks. Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.  

Content: 1 set


Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

Content: 1 set


soni VELCRO tape
Strongly adhesive Velcro tape - for easy and fast installation of acoustic materials.Our soni VELCRO tape is ideal for fastening acoustic elements such as soni ELEMENT or soni COMFORT.Simply press the Velcro side to the back of the acoustic panel, remove the protective film from the tape’s adhesive side and install the acoustic element at the desired spot on the wall or ceiling.Roll length: 5 mWidth: 50 mm

Content: 5 m (€4.98* / 1 m)