soni FIXING SET

For effortless and secure fixation of acoustic sheets

  • For effortless mechanical fixation
  • Full set of all parts needed for fixation
  • Secure fixation of acoustic panels
Set 1 / Set 2

€12.00*

Content: 1 set
Prod. no. 80800050

Available, delivery time 2-5 days

Description

For the mechanical fixation of soundproofing material.

Set 1 (for 25 to 32 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x70/42 and 20 fixation disks.

Set 2 (for 50 to 52 mm thick material) consists of 20 nylon anchors 8x40, 20 screws 6x90/56 and 20 fixation disks.

Technical data
Accessories: Accessories
Applications: Living space | Staircase
Car | Motor | Boat
Clubhouse | Banquet hall
Outdoor area | Pool
Wall towards neighbors | Curtain wall
Production hall | Workshop
Heat pump | HVAC
Sound studio | Rehearsal room
Machine | Compressor | Utility room
Note: - Easy handling
- Set 1 for 25 to 30 mm thick material; set 2 for 50 to 52 mm thick material
Set 1 / Set 2: Set 2 (for 50 to 52 mm material)
Product information request

Related products

soni SPECIAL ADHESIVE
Our soni SPECIAL ADHESIVE is an ideal adhesive for spot and full-surface fixation of sound-insulation materials and acoustic elements made of open-cell foam, especially melamine and PUR foams. The solvent-free, stable soni SPECIAL ADHESIVE provides excellent adherence to typical building materials, such as concrete, plaster, masonry, cement and wood. With the elastoplastic, single-component polymer adhesive, our open-cell foam panels can be glued directly to the wall or ceiling. Our soni SPECIAL ADHESIVE is available in 310-ml-cartridges, in sets of 6 or 12 cartridges. Please note: soni SPECIAL ADHESIVE is not suitable for PE foams such as soni RESIST. Keep out of reach of children!

Variants from €5.90*
€4.90*
soni MOUNTING PINS (20 pieces)
Our soni MOUNTING PINS offer an easy and fast method for the installation of acoustic materials on smooth and clean surfaces.  soni MOUNTING PINS have a base plate with self-adhesive back. The high-quality adhesive ensures secure installation of our acoustic materials for the long term. Use the enclosed fixation disk to hold the noise protection material in place. And, as a last step, cover the tip of the steel pin with the protective cap. The kit consists of 20 base plates with pin, plus fixation disks and protective caps.Kit 1 (pin length: 42 mm) is suitable for noise-control panels of 25 – 30 mm thicknessKit 2 (pin length: 63 mm) is suitable for noise-control panels of 50 mm thickness

€13.50*